90% Satin Water-Based Sealer/Primer and Top Coat (2in1)
Water-based, odourless, wood varnish and sealer based on a combination of acrylic and polyurethane resins for interior use. It has excellent working properties and good durability even if exposed to adverse stress or other conditions. It does not yellow over time, because of its anti-yellowing properties.
How to use: Surfaces should be smooth, clean, dry and free from grease or resins and abrased. On new wooden surfaces apply one coat of FFA1085 diluted with 20% water and then one or two coats of FFA1085 diluted by 10-15% with water. For maintenance of previously varnished surfaces apply one coat of FFA1085, provided that the surface has been thoroughly cleaned. First coat can be touch dry after 1-2 hours according to atmospheric and surface conditions. Second coat can be touch dry after 2-3 hours according to the same conditions.
Packing: It is available in 750 ml and 3 L pails.
WARNING!: Used only for interior surfaces! Temperature must not be under 10°C during application. It can be applied by roller, brush or airless spray gun. For better results, a second hand is recommended.